Standing Santa Claus
 This year decorate your home for the holidays with a standing Santa Claus!
The standing Santa can be as large or small as you want it to be or add your own patterns to it. Its a simple and easy project and guaranteed to be a great addition to this years holiday decorations. 
Materials:
• 1/4" thick sheet of 24" x 14" Pressboard (1 sheets)
• 1/8" thick sheet of 20" x 5" Pressboard (1 sheets)
• 1/4" thick sheet of 12" x 12" Pressboard (2 sheets)
• 1/8" thick sheet of 12" x 12" Pressboard (1 sheets)
• 1/4" thick sheet of 5" x 5" Pressboard (1 sheets)
• wood glue
• 3/4" cup hook Files: Right click on the file below and choose "Save target as." Open the file in CorelDraw 8 or later. Please note all files are Raster only.
 Now, we will put it all together. If you want to paint your pieces, you should do so before gluing all of your pieces together. This way you can get a nice, even paint job done and paint both sides of each piece without any hassle.
Take your wood glue, we used Elmer's ProBond, and start gluing your pieces to Santa Claus (Figure A). Let your project dry for a couple of hours.
Then take the hands from Step 2 and glue those onto the upper sides of Santa's body.
 Then take your buttons from Step 2 and place those up and down on the front of Santa's body.
 Now, grab your snowman and christmas tree and glue those to the bottom of Santa's body.
Take your 3/4" hooks and screw those into Santa's hands. Before you do this, take your santa sign and place the holes cut into the sign up to Santa's hands. Mark the area with a pencil so you know where to place your hooks  
When it is all dry you can place your piece in Santa's stands from
( stands circled in red).
And there you have it, your very own standing Santa Claus for this year's festivities! This page is copied from the site below. Goto www.epiloglaser.com
| 
