Cut Off Toolholder with HSS Blade

IMG_5967k

This is one of my easiest projects. It cost about 1 hour to make.

IMG_5959k

This is what you need.

1) a hss blade

2) a piece of steel.

IMG_5961k

cut off a part.
The depth is the same as the thickness of the blade and the height is 0.4mm smaller than the height of the blade.

IMG_5964k

at the other side you can cut off an other part, but this is not necessary.

IMG_5965k

drill two m6 holes

IMG_5966k

make a little plate with also 2 holes on the same place.

IMG_5967k

now it ready to use

IMG_5968k

perfect.