Cut Off Toolholder with HSS Blade
This is one of my easiest projects. It cost about 1 hour to make.
This is what you need.
1) a hss blade
2) a piece of steel.
cut off a part.The depth is the same as the thickness of the blade and the height is 0.4mm smaller than the height of the blade.
at the other side you can cut off an other part, but this is not necessary.
drill two m6 holes
make a little plate with also 2 holes on the same place.
now it ready to use
Copyright © 2009 www.majosoft.com. All Rights Reserved.
How to use abench-clamp
To set the Zero Margins on a milling machine
How to use a File
mathematics for metalworkers
How to make a drill center
Tips about a Drill
How to Saw
How to work with a Lathe
Handy Tools for the Lathe
How to Cut Screw Tread