\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo "

Free software Tools

\n"; echo "

On this site you can download some handy program’s for Free..

\n"; echo "

All the programs are programmed with Visual Basic 6.0.

\n"; echo "

At first you must download and installing the VB Runtime Files.

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"\"\"
\n"; echo " \n"; echo "

Vb runtime files  (1mb)

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

Now you can download my programs and run them.

\n"; echo "

You dont have to install them.

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

1) Rulers ( 72 kb )  ( bux fix 04 april 2005 ) - Rulers.Zip Complete install files ( 1.5MB)

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

With this program you can generate Straight and Rounded Rulers. ( only the stripes )

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo " \"rulers05\"
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo " \"rulers_small\"
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo "

This is the package.
stripe1, stripe3, stripe3, stripe3, stripe3, stripe2 and so on. The complete package will be repeated until the Length is reached.

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

If you want to have G-Code ? File -> Save G-Code.
I hope you can use my program.

\n"; echo "

Good luck.

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

2) BMP To Din G-Code Converter

\n"; echo "
    \n"; echo "

    With this program you can convert a Gray scale Bitmap to G-Code.
    This program converts only and it don’t look to the cutter diameter.
    Follow the steps and enjoy the program.

    \n"; echo "
\n"; echo "

How to work :

\n"; echo "

1) Load your picture in a Photo program.
    ( i’m using for this Irfan View or Photoshop)
2) Convert to grayscale
3) In Photoshop i’m using Auto Color
4) make with a filter some softer ( this is because when there is 1 white or 1 black pixel in a gray surface , you got a hole.
5) Save it as Grayscale ( 8 bit ) BMP File.
6) Load the picture in my program.
7) set the distance between every pixel in X and Y direction.
8) set the distance between black and white. ( when you set negative , the picture wil be negative )
9) Save G-Code.

\n"; echo "

attend : If you making a picture of 1800 X 1200 pixels then you got a
G-code File of 1800X1200 =  2.160.000 lines .( Yes i know ,  it’s a nice program to fill your harddisk )

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo " \"8
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

Download program BMP to G-Code ( 60 KB ) only exe
Download Complete install file ( 1.9MB )

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

3) Macro’s

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

With this program you can generate simple circles , squares and rounded squares.
You can also using the option Filling.
The Radius of your tool is also important.

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"\"\"\"\"
\n"; echo " \n"; echo "
\n"; echo " \n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

Here you see the differents between Fill and no Fill

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"\"\"\"\"\"\"\"\"
\n"; echo " \n"; echo " \"macro3\"
\n"; echo " \n"; echo " \"macro4\"
\n"; echo " \n"; echo "

Download Macro’s (52kb)
Download Complete install file ( 1.39MB )

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

4) Target PCB Designer To G-Code Converter

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

Download your full working demo version now for private and non-commercial purposes!
Use all features (schematic, PCB, autoplacer, EMV-analysis, contour autorouter, simulation etc.).
The internal database is resticted to 100 pins/pads, two copper layers.The simulation is resticted to 30 signals.
 Click here to go Download Page of Target PCB Designer

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

Click here for the first steps with Target

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

Click here for a small tutorial of Target From nothing to Engraving PLT File ( pdf )

\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\n"; echo " \n"; echo " \"target\"
\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"\"\"
\n"; echo " \n"; echo "

This is my program. It will convert a Target plotter file to 2 G-Code Files. One is Drill file and one is Engraving file.

\n"; echo "
\n"; echo "
\n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo " \n"; echo "
\"\"
\n"; echo " \n"; echo "

Download  Target PCB Designer To G-Code Converter (56kb)
Download Complete install file ( 1.39MB )

\n"; echo "
\n"; echo " \n"; echo "
\n"; echo "